Product manual
Filler/reinforcement glass fiber reinforced material, 15% filler
General description | ||||
Material status |
Solid state |
|||
Exterior |
natural color |
|||
processing methods |
Injection molding |
|||
Stuffing |
glass fiber |
|||
form |
particle |
|||
Physical properties [1] |
Test method |
Test Conditions |
Unit |
Attribute value[2] |
proportion |
ASTM D792 |
(23±0.5)°C |
g/cm3 |
1.050 |
Melt mass flow rate |
ASTM D1238 |
230°C/2.16kg |
g/10min |
4.85 |
Shrinkage |
ASTM D955 |
% |
0.6 |
|
Mechanical properties [1] |
Test method |
Test Conditions |
Unit |
Attribute value[2] |
Tensile Strength |
ASTM D638 |
50mm/min |
MPa |
44.1 |
Bending strength |
ASTM D790 |
2mm/min |
MPa |
69.5 |
Flexural modulus |
ASTM D790 |
2mm/min |
MPa |
2765 |
Thermal performance [1] |
Test method |
Test Conditions |
Unit |
Attribute value[2] |
Heat distortion temperature |
ASTM D648 |
0.45MPa,Unannealed |
°C |
146 |
Impact performance [1] |
Test method |
Test Conditions |
Unit |
Attribute value[2] |
Izod notched impact strength |
ASTM D256 |
(23±3)°C |
J/m |
48 |
Flammability [1] |
Test method |
Test Conditions |
Unit |
Attribute value[2] |
Tensile Strength |
UL 94 |
/ |
/ |
HB |
[1] The material properties of different colors will vary. [2] The attribute values are for reference only, not as any technical indicators or technical agreements. |
PP has high stiffness, high hardness and high strength, but notch impact resistance is general. PP material can withstand tensile stress and is easy to weld. It becomes brittle at low temperature and has good chemical stability and electrical properties. The working temperature ranges from 0 degrees to 100 degrees.
Features: low density; heat resistance, no deformation; high stiffness; high surface strength; good chemical stability; non-toxic and harmless;
Application: pump valve parts, drinking water and sewage pipes, seals, spraying carriers, corrosion-resistant tanks, barrels, acid and alkali resistant industrial use, waste water, exhaust gas discharge equipment, washing tower, clean room, semiconductor factory and related industries Equipment and machinery, food machinery and chopping boards, electroplating process, toy parts, dental catheters, are widely used in chemical, mechanical, electrical and electronic industries and other structural materials.
http://www.tlgxsales.com/